Selective Pallet Rack

A: A selective storage racking typically supports 1,000–5,000 kg per beam level, depending on beam length, upright gauge, and bay width. The exact rating is calculated from your heaviest pallet weight multiplied by the number of pallet positions per level, so always confirm the figure with the manufacturer's engineer before loading.

A: A standard bay with beams around 2,300–2,700 mm long holds two pallets per level; longer bays (e.g., 3,600 mm) can hold three. What matters more than the count is that the beam pair's rated capacity covers the combined weight of all pallets on that level.

A: Selective storage racking gives forklifts direct access to every pallet position (100% selectivity) and is the most flexible and widely used system. Drive-in racking packs pallets deeper into the bay for higher density but works on a last-in-first-out basis with limited access. Choose selective when you need fast turnover and many SKUs; choose drive-in only when density outweighs access.

A: A selective rack stores full pallets on beams and is accessed by forklift, typically carrying 1,000–5,000 kg per level up to 12 m high. A medium duty pallet racking is a freestanding shelf unit accessed by hand or pallet truck, carrying 150–800 kg per shelf up to about 3 m. Use selective racks for palletized bulk stock; use medium duty racks for cartons, parts and manually handled goods — many warehouses run both together.

A: A medium duty pallet racking shelf is typically rated from 150 kg to 800 kg per level, depending on beam size, shelf depth and configuration. Send your goods' weight and dimensions to the manufacturer and they will confirm the exact rating for your layout.

A: A warehouse medium duty racking is used wherever goods are handled by hand rather than by forklift: workshops and maintenance areas, retail backrooms, spare parts and tool stores, office archives, and light assembly lines. Its adjustable shelf levels and low entry cost make it the practical choice for organizing cartons, boxes, and small containers in smaller spaces.

A: Powder coating is the cost-effective standard choice: durable, available in brand colors, and ideal for normal indoor conditions. Hot-dip galvanizing costs several times more but offers superior corrosion resistance, making it the right choice for humid environments, cold storage, wash-down areas, and outdoor use. Most indoor warehouses are well served by powder coating.

A: Wire mesh decking is not mandatory, but it is strongly recommended. It closes the gap between beams so small cartons and loose items cannot fall into the aisle, improves load stability, and helps you comply with safety standards for stored goods. It also lets light and sprinkler water pass through and can be added to existing racks without bolts.