The main components of the storage cage are divided into mesh manufacturing and chassis manufacturing.
The mesh is cut into various lengths, and then touched by a welding machine to make a semi-finished mesh. Most of the meshes are galvanized, and also sprayed. The anti-rust galvanizing is better than spraying. Wire diameter is an important parameter for bearing.
The chassis is processed by a bending machine from raw material sheets. The sheets are usually 1.8 and 2.5, and then cut and manually welded into channel steel. At the mercy of the chassis is an important parameter for carrying.
There are two types of welding between the bottom mesh and the bottom channel. One is manual welding, which cannot guarantee that every contact point is welded; the other is the full welding technology commonly used by Shanghai enterprises. Every contact point between the channel and the mesh passes through. Machine welding machine, stronger bearing capacity.
Finally, the mesh and chassis are assembled through springs and return buckles.
